2024 KTM 250 SX

New Motocross
New Motocross Motorcycle in Worcester, MA
Wagner Motorsports
Location Worcester, MA

Listing


Location:
Worcester, MA see map
Condition:
New
Dealer:
Wagner Motorsports
Price:
Mileage:
5m
Color:
ORANGE
Age:
249d
Stock #:
CK986
VIN:
VBKSXM239RM296238
Powered by VinAudit Logo
Powered by VinAudit Logo

Description


For decades, the 250 cc 2-stroke class has been at the forefront of pure unadulterated performance. It is epitomized by sweet-smelling 2-stroke smoke, top-end powerbands and 'Braaaap!'. The 2024 KTM 250 SX takes that to an all-new, gnarlier level. Thanks to a swathe of cutting-edge advancements across the board, this 2-stroke legend has stepped up, and even further out of reach of the competition.

  •  
  • BEFORE THE GATE
  • Easy Suspension Adjustment: Get dialed in! The 2024 KTM SX range boasts totally tool-free suspension setup at both ends. Thanks to the shock absorber design featuring hand-adjustable dual compression control, it allows riders to adjust high- and low-speed settings in a matter of seconds. On the front end, the forks are also easily adjusted thanks to a single air pressure preload valve, as well as through easy access click adjusters for compression and rebound. We'll even throw the air pump in as standard.
  • Electronic Fuel Injection: Pre-mix gets a remix across the 2-stroke KTM SX range, with electronic fuel injection setting the standard. Now there's no more fiddly jetting setup pre-race, And thanks to the Keihin EFI and reed valve case design, you can be guaranteed of laying down optimal power at any altitude, all of the time.
  • Electric Start: Picture this; You're 7 laps into an absolute ripper of a race. You miss your line and end up stalling in a deep rut. But you don't sweat it. All you do is press the starter button and you blast off again to take the final flag. This is the reality on the 2024 KTM 250 SX. Thanks to a 12,8V 2 Ah lithium ion battery is placed under the rider's seat, a high-quality stator & pickup and super robust design, the only thing you'll be kicking - is ass.
  •  
  • START STRONG
  • EFI + Power Valve: With EFI comes great rideability. Along with the electronic fuel injection, a Power Valve has also been fitted to the KTM 250 SX, allowing for more usable power throughout the rev range. Smoother power means better traction. Better traction means holeshot heaven!
  • Performance: The KTM 250 SX has always represented the very best of unsurpassed power and lightweight construction. The simplicity and low maintenance cost of the 2-stroke motor have made it a favorite amongst motocross riders for generations. For 2024, The KTM 250 SX enters the race paddock with 53 hp, and an overall engine weight of only 23,9 kg, setting the 250 SX engine sets the benchmark in the highly competitive 250 cc class.
  • Selectable Maps: The 2024 KTM 250 SX features a map select switch allowing the racer to switch between 2 engine maps. Map 1 provides a linear, predictable power delivery, while Map 2 gives it the full beans with crisp, explosive power output.
  •  
  • CALM UNDER FIRE
  • Absolute Control: No matter how gnarly the track is, you'll stay in complete control thanks to the frame design that has not only been engineered for longitudinal rigidity but also repositions rotating mass closer to the center of gravity. The shock mounting also provides improved anti-squat behavior to better traction out of corners, while the footpeg mounting position has moved inwards for less risk of hooking up in deep ruts or when scrubbing jumps.
  • Ergonomics: The 2024 KTM SX and SX-F range feature a rider triangle, providing improved knee contact - especially when standing on the pegs - with improved gripping surfaces all around. The plastics work to expel mud buildup in wet, muddy conditions, with a flatter seat profile and high grip seat cover providing exceptional rider movement and control. The polyamide reinforced aluminum subframe further enhances rider feel and feedback.
  • Mass Centralization: With a major emphasis placed on mass centralization, the 2024 KTM 250 SX engine is designed to centralize rotating mass for optimal operation with the chassis. This results in a lighter, more agile handling feel that simply runs rings around the competition.
  •  
  • HIT THE BIG STUFF
  • Traction: Ready to rip your arms out of the sockets? Together with the benefits of mass centralization and overall reduced weight, the anti-squat behavior of the chassis is significantly improved by changing the backbone of the steel frame concept. In layman's terms, the 2024 KTM 250 SX gets its power down perfectly when tearing out of corners.
  • Stability: The 2024 KTM 250 SX is rock-solid at any speed thanks to a repositioned and forged steering head connection and CNC milled triple clamps. Made from high-grade aluminum, these feature optimally tuned steering stem stiffness, perfect alignment of the fork tubes, and precise geometry of the fork clamps to ensure highly responsive and smooth fork action - not to mention unwavering stability when charging across ruts and onto the podium.
  •  
  • MAINTAINING MOMENTUM
  • Energy Absorption: Besides the expertly crafted, hydro-formed, laser-cut, and robot-welded frame being engineered to provide exceptional rider feedback and straight-line stability, it consists of specifically calculated parameters of longitudinal and torsional flex. This means the frame acts as a 'shock absorber' of sorts, making for a less harsh ride, resulting in less rider fatigue over many hard laps.
  • Ground Clearance: No one enjoys a bad hook-up. Luckily, the frame and shock absorber geometry on the 2024 KTM 250 SX improve ground clearance of the linkage, with topology optimized die-cast footpegs that are less susceptible to hooking on deep ruts, and take-offs when scrubbing.
  • Consistency: A WP XACT shock absorber provides unmatched consistency lap after lap, thanks to low-friction SKF linkage seals and advanced damping characteristics for unsurpassed traction and energy absorption.
  •  
  • ENGINE SPECIFICATIONS
  • Transmission: 5-speed
  • Starter: Electric starter
  • Stroke: 72 mm
  • Bore: 66.4 mm
  • Clutch: Wet, DDS multi-disc clutch, Brembo hydraulics
  • Displacement: 249 cm³
  • EMS: Vitesco Technologies EMS
  • Design: 1-cylinder, 2-stroke engine
  •  
  • CHASSIS SPECIFICATIONS
  • Weight (without fuel): 99.4 kg
  • Tank capacity (approx.): 7.2 l
  • Front brake disc diameter: 260 mm
  • Rear brake disc diameter: 220 mm
  • Front brake: Disc brake
  • Rear brake: Disc brake
  • Chain: 520, Non-sealed
  • Frame design: Central double-cradle-type 25CrMo4 steel
  • Front suspension: WP XACT-USD, Ø 48 mm
  • Ground clearance: 359 mm
  • Rear suspension: WP XACT Monoshock with linkage
  • Steering head angle: 63.9 °
  • Suspension travel (front): 310 mm
  • Suspension travel (rear): 300 mm
  •  
NOTES:
The illustrated vehicles may vary in selected details from the production models and some illustrations feature optional equipment available at additional cost. All information concerning the scope of supply, appearance, services, dimensions and weights is non-binding and specified with the proviso that errors, for instance in printing, setting and/or typing, may occur; such information is subject to change without notice. Please note that model specifications may vary from country to country. In the case of coated surfaces, there may be color differences due to the usual process fluctuations. The consumption values stated refer to the roadworthy series condition of the vehicles at the time of factory delivery.

MotoHunt Price Research

This pricing information is provided to you by MotoHunt to help you make an informed decision.

Base MSRP:
$9,149
The Manufacturer Suggested Retail Price in 2024. This is the base (lowest) MSRP for this model and higher-level trims and other color variations might have a bigger MSRP.
ALP:
$8,985
Average Listing Price of New 2024 KTM 250 SX This price is calculated taking into account both currently available listings, and recent sales.

Model:
2024 KTM 250 SX
Beginner Motocross
Engine:
249 cc, 2-stroke
Made in:
Mattighofen, Austria
More Info:

Reviews

Reviews related to 2024 KTM 250 SX

NHTSA Specifications
Specifications provided by the National Highway Traffic Safety Administration
Engine
Engine Stroke Cycles
2
Fuel Type - Primary
Gasoline
Other Engine Info
Displacement (CC): 200-249
Exterior / Body
Body Class
Off-road Vehicle - Motocross (Off-road short distance; closed track racing)
Exterior / Motorcycle
Other Motorcycle Info
Closed course competition
General
Make
KTM
Manufacturer Name
KTM AG
Model
Closed Course Competition
Model Year
2024
Plant City
MATTIGHOFEN
Plant Country
AUSTRIA
Vehicle Type
MOTORCYCLE
Vin
Error Code
0;10

Wagner Motorsports
700 Plantation St
Worcester, MA 01605
508 581 5950
View listing on Wagner Motorsports
www.wagnermotorsport.com
Contact Seller
By pressing Send, you agree to our Privacy Statement & Terms of Use.

Dealer Description


About Wagner Motorsports
Welcome to Wagner Motorsports, where the variety of powersports products is second to none. We offer full lineups for Indian Motorcycle and BMW Motorrad, and we are the only full-service, full-line dealer in Massachusetts for KTM dirt bikes and street bikes west of Interstate 495! There isn't a friendlier or more knowledgeable staff than ours. We're happy to help you find either the perfect bike or the parts you've been looking for. Check out our online store to see what we have. If you need help in making your selection, call or stop in—we're always ready to help!

We are family-owned and operated and proudly owned by a USMC Veteran.

We know individuality is important, which is why we pay close attention to the interests of each customer. From the minute you walk through the door, meeting your needs is our top priority. Founded not only on excellent customer service but also on the principles of hard work and a focused attitude, Wagner Motorsports has a long list of satisfied customers. Our showrooms are being updated daily with new products! If you need it, we likely have it. Call or stop by; you’ll be glad you did.

Check your VIN Instantly


Powered by VinAudit Logo
NHTSA Specifications
Specifications provided by the National Highway Traffic Safety Administration
Engine
Engine Stroke Cycles
2
Fuel Type - Primary
Gasoline
Other Engine Info
Displacement (CC): 200-249
Exterior / Body
Body Class
Off-road Vehicle - Motocross (Off-road short distance; closed track racing)
Exterior / Motorcycle
Other Motorcycle Info
Closed course competition
General
Make
KTM
Manufacturer Name
KTM AG
Model
Closed Course Competition
Model Year
2024
Plant City
MATTIGHOFEN
Plant Country
AUSTRIA
Vehicle Type
MOTORCYCLE
Vin
Error Code
0;10